Hello,
customization of skins is a very fine solution for changing page
structures, cause it survives updates. In pre XWiki 3.1 we edited
the global.vm of the colibri skin and our header was shown on all
pages, including the login. In XWiki 3.1 there is no global.vm
(in colibri) anymore and the skin customizing doesn't work on the
login page, so how can we change that page, too?
--
Mit freundlichen Grüßen
Werner Greßhoff
Dezernat 2 - Digitale Dienste
Universitäts- und Landesbibliothek Münster
I am out of the office from Sat 07/16/2011 until Wed 08/17/2011.
Geachte mevrouw, mijnheer,
Op het moment kan ik uw mail niet beantwoorden. Voor dringende zaken kunt u
zich wenden tot het secretariaat van het EMI:
marion.linnebank(a)rivm.nl, T 030-2742913
anne.marie.van.kleef(a)rivm.nl, T 030-2748570
Met vriendelijke groet,
Wouter Boasson
Note: This is an automated response to your message "users Digest, Vol 48,
Issue 26" sent on 18-7-2011 12:00:17.
This is the only notification you will receive while this person is away.
Hi,
I would like to conditional show pages based on request parameter
But i'm struggling with the fact if there is not a request parameter
{{velocity}}
#if("$request.cntryCode" != "es")
{{include document="Sandbox.TryCr"/}}
#else
{{include document="Sandbox.TryEs"/}}
#end
{{/velocity}}
So if the request parameter cntryCode is not "es" (so anything else) show first page TryCr otherwise show page TryEs
But what if no parameter is givven; then I would like to show TryEs (assume parameter was "es"
Any suggestions
second question; how can i best use the parameter to avoid extensive coding;
Instead of
#if("$request.cntryCode" != "cr")
{{include document="Sandbox.Trycr"/}}
#elseif("$request.cntryCode" != "hn")
{{include document="Sandbox.Tryhn"/}}
#elseif("$request.cntryCode" != "el")
{{include document="Sandbox.Tryel"/}}
#elseif("$request.cntryCode" != "ng")
{{include document="Sandbox.Tryng"/}}
#else
{{include document="Sandbox.TryEs"/}}
#end
I would only think i need to concatenate the parameter to the end of the documentname Tryxx to get the good document
Hope somebody can help me
Gerritjan
Ik ben afwezig van Za 07/16/2011 tot Wo 08/17/2011.
Geachte mevrouw, mijnheer,
Op het moment kan ik uw mail niet beantwoorden. Voor dringende zaken kunt u
zich wenden tot het secretariaat van het EMI:
marion.linnebank(a)rivm.nl, T 030-2742913
anne.marie.van.kleef(a)rivm.nl, T 030-2748570
Met vriendelijke groet,
Wouter Boasson
Note: This is an automated response to your message "users Digest, Vol 48,
Issue 24" sent on 16-7-2011 12:00:07.
This is the only notification you will receive while this person is away.
I will be out of the office starting 07/15/2011 and will not return until
07/18/2011.
Please contact Gopalkrishnan Shanmugam for SSO,Sakthivel Nagaraj
for WIRED ,Rajyalakshmi Srikantha BOT with Kailash Radhakrishnan being the
escalation contact.
Please contact Krishnan Gopalrao for TSFD Blog and CCIVR in care required,
E-mail Disclaimer: http://www.csscorp.com/common/email-disclaimer.php
Hi All,
I have a bit of newby question which affects userrights.
I have a page with content, which different usergroups will look at.
I want that Usergroup A only sees the top bit of the page, and
Usergroup B to see the whole page (top and bottom). Can I do this over
Rightsmanagement?
So that Group A will only see some Content of the Page, and Group B
will see the total Content.
One of the reasons why I want this, is that I do not want that Group A
sees that there is more content which they cannot access.
I was thinking of using the include makro here, but it would be far
easier to have just one single document and use Rightsmanagent to
determine who sees what on the page.
I hope I expressed my question clearly, any help would be appreciated.
Thanks in advance,
Wouter
Hi all,
I have a problem with the parent child relationships.
The problem has allready been an issue (see detailed information
below) and a solution has been given by Sergiu Dumitriu, but this
solution does not seem to work for me.
Whenever I leave out the space from the parent, my child has no
parents at all anymore, it does not automatically get parents
assigned.
Basicly what I want to do is set up mutliple spaces, where some pages
are used in more than only one space. I want that the users stay in
their respective space, but see the pages form other spaces sometimes.
What works great for this is the include macro, but the bigger my wiki
gets, the more includes I have and this might get a bit chaotic in the
future. A much cleaner solution would be to just link from one
Space.Page to another, but when I do this my breadcrumb navigation
does not follow, since I have the Parent Child issue unsolved.
I know it must work, I just dont know how to get it to work.
Any help would be greatly appreciated.
Greetings,
Wouter
On 05/13/2010 10:19 AM, S.L wrote:
>
> Hi all,
>
> I have a page "Child" in with Space A(A.Child), with parent "A.Main".
>
> Now I would like to copy this page to Space B, so it becomes "B.Child with
> parent "B.Main".
> But when I copy page using copy function in UI or using
> "xwiki.xWiki.copyDocument", "B.Child" 's parent is always "A.Main".
>
> What could I do to acheive my expected result, "B.Main"? Since I would like
> to use marco to copy multiple pages, I hope I could find a solution besides
> manually modifying the pages.
>
> Thank you so much for you help!
You can leave out the space from the parent, as in "Main". This will
always resolve to the "Main" document in the current space, thus A.Main
when the document is in the space A, B.Main when in space B.
--
Sergiu Dumitriu
from: http://lists.xwiki.org/pipermail/users/2010-May/020659.html
Hi,
Does anyone know how to add links to files on a project network drive? We
have a lot of files on our network drives and there's a reluctance to attach
all the files into the wiki. So to ease people into using the wiki it would
be nice to allow them to easily link out to external files. Currently XWiki
allows users to link to other wiki pages, other web pages or attached files
but not external files .... is there a way provide a means to add links to
external files?
Regards,
Richard
Thales UK Ltd (Wells) DISCLAIMER: The information contained in this e-mail
is confidential. It may also be legally privileged. It is intended only for
the stated addressee(s) and access to it by any other person is
unauthorised. If you are not an addressee, you must not disclose, copy,
circulate or in any other way use or rely on the information contained in
this e-mail. Such unauthorised use may be unlawful. We may monitor all
e-mail communications through our networks. If you have received this e-mail
in error, please inform us immediately on sender's telephone number above
and delete it and all copies from your system. We accept no responsibility
for changes to any e-mail which occur after it has been sent. Attachments
to this e-mail may contain software viruses which could damage your system.
We therefore recommend you virus-check all attachments before opening.
Thales UK Ltd. Registered Office: 2 Dashwood Lang Road, The Bourne Business
Park, Addlestone, Weybridge, Surrey KT15 2NX Registered in England No.
868273
Hi, folks.
I’m trying to do some local testing of XWiki Enterprise, because it looks like a great resource for me to manage my group’s documentation, but I’m running into some issues.
I downloaded the Windows executable and installed XE locally (on the C: drive of a Windows 7 system), and everything seemed to install correctly. I have the start and stop desktop icons.
I clicked the start icon and a DOS window flashed open and closed. When I tried to open XWiki in my browser at http://localhost:8080/, I received a “This webpage is not available” message. I’m not sure if I have a port issue, and I didn’t see anything in the users mailing list archives that related to this issue. Does this problem sound familiar to anyone, and if so, how can it be fixed?
Thanks.
_____________
John Campbell
NOC Technical Writer
WildBlue Communications, Inc.
720.493.6324 ◊ john.campbell(a)viasat.com <mailto:john.campbell@viasat.com>
Yes setting an interval did solve the problem - thanks!
Richard
-----Original Message-----
From: users-bounces(a)xwiki.org [mailto:users-bounces@xwiki.org] On Behalf Of
Sergiu Dumitriu
Sent: 14 July 2011 14:19
To: XWiki Users
Subject: Re: [xwiki-users] XWiki email not working
On 07/14/2011 03:08 AM, goldring, richard wrote:
> Thanks Sergiu - I didn't realise that the interval wasn't set by
> default - its not as clear as it could be in the documentation -
> perhaps users should be warned in a popup message when they set a
> watch on a page and the interval hasn't been set to remind them?
Yes, this is an annoying bug, it should be fixed by default. So, setting an
interval did solve the problem, right?
> As for the other issue with sharing a page .... Then I'll just have to
> upgrade to the latest Xwiki.
>
> Thanks again
>
> Richard
>
>
>
> -----Original Message-----
> From: users-bounces(a)xwiki.org [mailto:users-bounces@xwiki.org] On
> Behalf Of Sergiu Dumitriu
> Sent: 13 July 2011 17:58
> To: XWiki Users
> Subject: Re: [xwiki-users] XWiki email not working
>
> On 07/13/2011 03:13 AM, goldring, richard wrote:
>> Hi All,
>>
>> I'm still not able to email using Email a wiki page or via the Watch
>> plugin.....
>>
>> I've set up my email server (sendmail) on my Solaris server and set
>> the appropriate setting in XWiki to talk to it and using the code
>> below (taken from the XWiki website) to successfully send an email
>> (presumably this uses the email plugin??) :
>>
>> {{velocity}}
>> #if($xwiki.hasAccessLevel('admin'))
>> #if("$!{request.action}" == 'send_mail'&& "$!{request.lastname}" == '')
>> ## Check submission and honey pot.
>> #if("$!request.recipient" != ''&& "$!request.subject" != '')
>> #set($result =
>> $xwiki.mailsender.sendTextMessage("no-reply(a)xwiki.com
>> <mailto:no-reply@xwiki.com> ", $request.recipient, $request.subject,
>> "$!request.message"))
>> #if($result == -1)
>> {{error}}A problem occurred while sending the mail.{{/error}}
>> #else
>> {{info}}Everything went OK.{{/info}}
>> #end
>> #else
>> {{error}}Please specify at least a recipient and a
subject{{/error}}
>> #end
>> #end
>>
>> {{html wiki=true}}
>> <form action="" method="post">
>> <input name="action" value="send_mail" type="hidden" />
>> ## this is a honey-pot hidden text field hat hopefully robots
>> will not leave empty
>> <div class="hidden">
>> <input name="lastname" type="text" />
>> </div>
>> <fieldset>
>> **TO:**<br />
>> <input type="text" name="recipient" /><br />
>> **SUBJECT:**<br />
>> <input type="text" name="subject" /><br />
>> **MESSAGE:**<br />
>> <textarea name="message" style="width:99%;" rows=10>Your test
>> message here.</textarea>
>> </fieldset>
>> <div>
>> <span class="buttonwrapper"><input type="submit" class="button"
>> value="Send" /></span>
>> </div>
>> </form>
>> {{/html}}
>> #else
>> {{error}}Oops. Area restricted to Admins, sorry.{{/error}} #end
>> {{/velocity}}
>>
>>
>> BUT ..... in my XWiki wiki (I have the latest version) when I select
>> to email a wiki page and press the Send button nothing seems to
>> happen (I assume the email dialog should close when you press the
>> Send button and an email should be sent), also when adding a Watch on
>> the wiki or wiki page and the page is changed then no email is sent
>> to the user who has put the watch on the page .... does anyone know
>> why the emails
> aren't getting sent????
>
> For the watch problem, check that the user has selected a valid
> watchlist interval, since by default all users have the watchlist emailer
disabled.
> You can do that by going to your profile, and editing the preferences
> on the Watchlist tab.
>
>> Having the facility to email a wiki page and to watch wiki pages
>> would certainly help get more people to use our wiki.
>>
>> Any clues for fixing this would be most appreciated!
>>
>> Thanks.
>>
>> Richard
>
--
Sergiu Dumitriu
http://purl.org/net/sergiu/
_______________________________________________
users mailing list
users(a)xwiki.org
http://lists.xwiki.org/mailman/listinfo/users
Thales UK Ltd (Wells) DISCLAIMER: The information contained in this e-mail
is confidential. It may also be legally privileged. It is intended only for
the stated addressee(s) and access to it by any other person is
unauthorised. If you are not an addressee, you must not disclose, copy,
circulate or in any other way use or rely on the information contained in
this e-mail. Such unauthorised use may be unlawful. We may monitor all
e-mail communications through our networks. If you have received this e-mail
in error, please inform us immediately on sender's telephone number above
and delete it and all copies from your system. We accept no responsibility
for changes to any e-mail which occur after it has been sent. Attachments
to this e-mail may contain software viruses which could damage your system.
We therefore recommend you virus-check all attachments before opening.
Thales UK Ltd. Registered Office: 2 Dashwood Lang Road, The Bourne Business
Park, Addlestone, Weybridge, Surrey KT15 2NX Registered in England No.
868273