8 Dec
2008
8 Dec
'08
6:24 p.m.
Seems when you upgrade from 1.4.1 to 1.6.1 then you need to resave all pages
that have "restricted" calls in them? For example, I use .search() in some
of my pages, but after upgrading the xwiki they won't work until I resave
the pages.
On upgrading, I did not import the XWiki.Admin user (this caused problems
the first time I upgraded so I avoid that now).
I have about 200-250 pages in this state.
Can this be done in one sweep, or can it be turned off?
--
View this message in context:
http://n2.nabble.com/Upgrade-from-1.4-to-1.6.1-and-need-to-resave-all-scrip…
Sent from the XWiki- Users mailing list archive at Nabble.com.
11 Dec
11 Dec
2:15 p.m.
Sorry being a pain..
Is there no way of avoiding this? It effectively stops me from upgrading
past my current version of xwiki.
underbad wrote:
Seems when you upgrade from 1.4.1 to 1.6.1 then you need to resave all
pages that have "restricted" calls in them? For example, I use .search()
in some of my pages, but after upgrading the xwiki they won't work until I
resave the pages.
On upgrading, I did not import the XWiki.Admin user (this caused problems
the first time I upgraded so I avoid that now).
I have about 200-250 pages in this state.
Can this be done in one sweep, or can it be turned off?
--
View this message in context:
http://n2.nabble.com/Upgrade-from-1.4-to-1.6.1-and-need-to-resave-all-scrip…
Sent from the XWiki- Users mailing list archive at Nabble.com.
12 Dec
12 Dec
12:01 p.m.
underbad wrote:
Sorry being a pain..
Is there no way of avoiding this? It effectively stops me from upgrading
past my current version of xwiki.
You shouldn't need this at all. Why are you saying it is not working?
Programming rights are lost in three cases:
1. You save the affected document with a user without programming rights
(in which case you are intentionally removing rights)
2. You delete the user who provided programming rights to the document
(and you just need to re-create the user, not save all the documents)
3. You delete the rights from that user (and you just need to re-add
those rights)
Make sure it isn't only a cache problem, try restarting the wiki after
you import the new data and set the proper rights.
underbad wrote:
--
Sergiu Dumitriu
http://purl.org/net/sergiu/
Seems when you upgrade from 1.4.1 to 1.6.1 then
you need to resave all
pages that have "restricted" calls in them? For example, I use .search()
in some of my pages, but after upgrading the xwiki they won't work until I
resave the pages.
On upgrading, I did not import the XWiki.Admin user (this caused problems
the first time I upgraded so I avoid that now).
I have about 200-250 pages in this state.
Can this be done in one sweep, or can it be turned off?
1:14 p.m.
New subject: [xwiki-users] Upgrade from 1.4 to 1.6.1 and need to resave all script pages???!??
Thanks,
In this case I use XWiki.Admin as the user for all developments. Other than
importing the XAR (did not updating standard groups and users), only change
is the new xwiki war to the newer version.
On Fri, Dec 12, 2008 at 11:01 AM, Sergiu Dumitriu <sergiu(a)xwiki.com> wrote:
underbad wrote:
--
Sergiu Dumitriu
http://purl.org/net/sergiu/
_______________________________________________
users mailing list
users(a)xwiki.org
http://lists.xwiki.org/mailman/listinfo/users
Sorry being a pain..
Is there no way of avoiding this? It effectively stops me from upgrading
past my current version of xwiki.
You shouldn't need this at all. Why are you saying it is not working?
Programming rights are lost in three cases:
1. You save the affected document with a user without programming rights
(in which case you are intentionally removing rights)
2. You delete the user who provided programming rights to the document
(and you just need to re-create the user, not save all the documents)
3. You delete the rights from that user (and you just need to re-add
those rights)
Make sure it isn't only a cache problem, try restarting the wiki after
you import the new data and set the proper rights.
underbad wrote:
> Seems when you upgrade from 1.4.1 to 1.6.1 then you need to resave all
> pages that have "restricted" calls in them? For example, I use
.search()
> in some of my pages, but after upgrading the
xwiki they won't work until
I
> resave the pages.
> On upgrading, I did not import the XWiki.Admin user (this caused
problems
the first
time I upgraded so I avoid that now).
I have about 200-250 pages in this state.
Can this be done in one sweep, or can it be turned off?
1:22 p.m.
New subject: [xwiki-users] Upgrade from 1.4 to 1.6.1 and need to resave all script pages???!??
On Fri, Dec 12, 2008 at 12:01 PM, Sergiu Dumitriu <sergiu(a)xwiki.com> wrote:
underbad wrote:
It reminds me a problem I had once. When the importer overwrite a page
it first delete it, and when the XWiki.Admin user is deleted its
XWiki.XWikiAdminGroup membership is deleted too.
In this case, when you import the XWiki.Admin user by mistake you can
have to put it in the XWiki.XWikiAdminGroup again.
JV.
Sorry being a pain..
Is there no way of avoiding this? It effectively stops me from upgrading
past my current version of xwiki.
You shouldn't need this at all. Why are you saying it is not working?
Programming rights are lost in three cases:
1. You save the affected document with a user without programming rights
(in which case you are intentionally removing rights)
2. You delete the user who provided programming rights to the document
(and you just need to re-create the user, not save all the documents)
3. You delete the rights from that user (and you just need to re-add
those rights)
2:22 p.m.
New subject: [xwiki-users] Upgrade from 1.4 to 1.6.1 and need to resave all script pages???!??
On Fri, Dec 12, 2008 at 1:22 PM, Jean-Vincent Drean
<jean-vincent(a)drean.org> wrote:
On Fri, Dec 12, 2008 at 12:01 PM, Sergiu Dumitriu
<sergiu(a)xwiki.com> wrote:
The importer does not sens delete notification anymore. See
http://jira.xwiki.org/jira/browse/XWIKI-2365
underbad wrote:
It reminds me a problem I had once. When the importer overwrite a page
it first delete it, and when the XWiki.Admin user is deleted its
XWiki.XWikiAdminGroup membership is deleted too.
In this case, when you import the XWiki.Admin user by mistake you can
have to put it in the XWiki.XWikiAdminGroup again. Sorry being a pain..
Is there no way of avoiding this? It effectively stops me from upgrading
past my current version of xwiki.
You shouldn't need this at all. Why are you saying it is not working?
Programming rights are lost in three cases:
1. You save the affected document with a user without programming rights
(in which case you are intentionally removing rights)
2. You delete the user who provided programming rights to the document
(and you just need to re-create the user, not save all the documents)
3. You delete the rights from that user (and you just need to re-add
those rights)
JV.
_______________________________________________
users mailing list
users(a)xwiki.org
http://lists.xwiki.org/mailman/listinfo/users
--
Thomas Mortagne
14 Dec
14 Dec
7:38 p.m.
New subject: [xwiki-users] Upgrade from 1.4 to 1.6.1 and need to resave all script pages???!??
That's the thing.. I would have expected this to happen if I imported either
the base groups or base users. Luckily I have been doing the upgrade tests
on my own pc - so I've run through it a couple of times now.
Any included (or otherwise parsed) pages with "protected" instructions,
notably groovy scripts and .search() [obviously .searchDocuments() is fine]
do not work.
Even when I don't import the .XAR this happens with my current version
(1.4.1). I don't have any other versions to test - so I'm not sure if the
same happens with those.
On Fri, Dec 12, 2008 at 1:22 PM, Thomas Mortagne
<thomas.mortagne(a)xwiki.com>wrote;wrote:
On Fri, Dec 12, 2008 at 1:22 PM, Jean-Vincent Drean
<jean-vincent(a)drean.org> wrote:
It reminds me a problem I had once. When the importer overwrite a page
it first delete it, and when the XWiki.Admin user is deleted its
XWiki.XWikiAdminGroup membership is deleted too.
In this case, when you import the XWiki.Admin user by mistake you can
have to put it in the XWiki.XWikiAdminGroup again.
The importer does not sens delete notification anymore. See
http://jira.xwiki.org/jira/browse/XWIKI-2365
On Fri, Dec 12, 2008 at 12:01 PM, Sergiu Dumitriu
<sergiu(a)xwiki.com>
wrote:
> underbad wrote:
>> Sorry being a pain..
>> Is there no way of avoiding this? It effectively stops me from
upgrading
past my current version of xwiki.
You shouldn't need this at all. Why are you saying it is not working?
Programming rights are lost in three cases:
1. You save the affected document with a user without programming rights
(in which case you are intentionally removing rights)
2. You delete the user who provided programming rights to the document
(and you just need to re-create the user, not save all the documents)
3. You delete the rights from that user (and you just need to re-add
those rights)
JV.
_______________________________________________
users mailing list
users(a)xwiki.org
http://lists.xwiki.org/mailman/listinfo/users
--
Thomas Mortagne
_______________________________________________
users mailing list
users(a)xwiki.org
http://lists.xwiki.org/mailman/listinfo/users
5852
days inactive
5858
days old
6 comments
5 participants
participants (5)
-
Jean-Vincent Drean -
Joe -
Sergiu Dumitriu -
Thomas Mortagne -
underbad