New subject: [xwiki-users] Can't get XEM application xar imported in XEM 1.6

4 Apr 2009

Well, I am completely confused. I have exactly the same problem;
UBUNTU/JBOSS/XEM1.6

I had a default setup of XE working, deleted it and then did exactly the
same things except using XEM 1.6 and allowing all privs on the MYSQL
database. If I swap to the deployment of XE, works fine. It doesn't seem
to matter how I hit the server with XEM running, IP address, fully
qualified name, name with www., name with xwiki. I still get no wiki
exists.

Something happens, as the empty database gets populated with tables, but
that seems to be it. The xwiki.log seems to have a lot of entries
relating to lucene errors, but none of that makes sense either.

These seem to start with sonething like:
java.io.FileNotFoundException:
/home/jboss/jboss-4.2.2.GA/server/xwikisvr/work/jboss.web/localhost/xwik
i/lucene/segments_2 (No such file or directory)

This file doesn't exist, but the rights to create it if needed do. There
is a segments_1 created in this location

I have a question?
'add the right hosts to the main wiki's descriptor', what? And how?

Would it be possible to explain a little better, I just don't get what
you mean, and I have seached xwiki.org and in the group but cannot seem
to find anything that makes sense. I just want to load the default .xar
and get started creating a couple of wikis.

Dean Sellers applications engineer  
rinstrum smart weighing  
Ph: +61 7 3216 7166  Fax: +61 7 3216 6211    
dean.sellers(a)rinstrum.com  
41 Success St, Acacia Ridge, QLD, 4110  

www.rinstrum.com  

...
  -----Original Message-----
 From: users-bounces(a)xwiki.org 
 [mailto:users-bounces@xwiki.org] On Behalf Of 
 DRoss-Smith(a)reviewjournal.com
 Sent: Tuesday, 31 March 2009 12:09 AM
 To: XWiki Users
 Subject: Re: [xwiki-users] Can't get XEM application xar 
 imported in XEM 1.6

 Canel that... Should've been to intranet01 instead of localhost

 ----- Original Message -----
 From: Thomas Mortagne [thomas.mortagne(a)xwiki.com]
 Sent: 03/30/2009 04:04 PM ZE2
 To: XWiki Users &lt;users(a)xwiki.org&gt;
 Subject: Re: [xwiki-users] Can't get XEM application xar 
 imported in XEM 1.6

 Hi ,

 On Mon, Mar 30, 2009 at 15:12, Martijn Ras 
 &lt;martijn.ras(a)gmail.com&gt; wrote:
  Hello,

 I'm trying to set up XEM on a new machine.

 I put the XEM WAR file under the webapps folder of my tomcat 
 installation. Created the MySQL database, just like i used   to do with 
  the XE installations I performed so far, and set
the rights as 
 specified in the installation section of the AdminGuide. After 
 starting tomcat the database was created and everything else looked 
 fine.

 However, whatever i do everything is redirected to the page 
 http://example.com:9080/xwiki/bin/Main/ThisWikiDoesNotExist  
 By default XEM access a wiki based on it's host (see 
 http://manager.xwiki.org/xwiki/bin/view/AdminGuide/AccessWiki 
 for more details). If it's not listed in one of the wikis 
 descriptors, it can't find it. That said when no descriptor 
 can be found the following rules are applied:

     * if the host is an IP (127.0.0.1, 85.65.12.36, etc.) 
 XWiki select the main wiki
     * else, if the first part of the host name (what is 
 before the first point) is "www" XWiki select the main wiki
     * else, if the first part of the host name match a wiki 
 identifier XWiki select this wiki

 at the end if it still can't find anything he send you to the 
 configured URL indicating that the wiki you are trying to 
 reach does not exists (by default it's 
 http://example.com:9080/xwiki/bin/Main/ThisWikiDoesNotExist 
 in xwiki.cfg file).

 So, two solutions for you here:
 - clean way: access the main wiki with the ip if you can or 
 with a host starting with "www." (like www.xwiki.org) or 
 "xwiki." and add the right hosts to the main wiki's descriptor
 - set xwiki.virtual=0 in xwiki.cfg and restore it to 1 when 
 you correctly configured the main wiki descriptor

 (Just added it to
 http://manager.xwiki.org/xwiki/bin/view/AdminGuide/InstallationMySQL)

 I'm probably overlooking something really simple, anyways,   can one of 
  you please enlighten me on how to get the XEM XAR
loaded?

 Mazzel,

 Martijn.
 _______________________________________________
 users mailing list
 users(a)xwiki.org
 http://lists.xwiki.org/mailman/listinfo/users

 -- 
 Thomas Mortagne
 _______________________________________________
 users mailing list
 users(a)xwiki.org
 http://lists.xwiki.org/mailman/listinfo/users
 _______________________________________________
 users mailing list
 users(a)xwiki.org
 http://lists.xwiki.org/mailman/listinfo/users

 --
 This message was scanned by ESVA and is believed to be clean. 
 Click here to report this message as spam. 
 http://mailscanner.cooperreeves.com.au/cgi-bin/learn-msg.cgi?i d=2514E27DF3.A5F28

Re: [xwiki-users] Can't get XEM application xar imported in XEM 1.6